|
|
  Available in three main configurations:
8 Function Valve Pack
- Wandfluh directional control valves
- Optional check valves
- Pressure control at input c/w test point
- Flow control on all 16 outputs
- Hardwired to 37 pin Bratner connector
- Integral positive compensation unit (no need for additional compensation)
Intelligent Valve Pack
- Supplied as 8 Function Valve Pack with intelligent PCB
- RS232 communication
- 4 Analogue inputs
- 2 Analogue outputs
- Easily configurable and fully customisable laptop control system
Torque Tool Control System
- Supplied as Intelligent Valve Pack
- Turns feedback
- Torque feedback
- Pressure feedback
- 4 Valves – Main system pressure
- 4 valves – Proportional pressure control
- Easily configurable and fully customisable laptop control system
 Specifications
Hydraulics (as standard)
- 8 station 4 way / 3 position Wandfluh control valves
- Max flow per valve 15 L/min
- Max Pressure 250 bar
- Pressure Gauge ports
- Flow control valve for each line
- Integral positive compensator
- Manually adjustable cartridge for pressure input
- Electronic control board tested to 5000m
- Various electrical connector options
Hydraulic (options)
- Proportional pressure control
- Differential pressure transducer
- Cross port P/O check valves
- Second electrical connector for sensor inputs
- Suitable for upgrade for torque tool control system
Electrical
- Power 24VDC @ <8.35A (350mA nominal plus 600mA - 1000mA per solenoid as used)
- Onboard 24V +/-15V
Inputs
4 analogue inputs 0-5 or 0-10V with following input options:
- Input 1 - suitable for turns counters, fast counter <2Khz <12V signal
- Input 2 - optional 4-20mA input 2/3/4 wire type, any sensor design
- Input 3 - temperature for simple PT 100 resistive type sensor
- Input 4 - optional high gain differential pre amplifier suitable for use with non amplified torque sensor or similar resistive type bridge sensor (stain gauges etc.)
Input (options)
- Compensator transducer
- Water detect
Outputs
- 16 Digital FET outputs <1.2A with diode protection and LED indicators
- 2 analogue outputs +/- 5 or +/- 10V
Output (options)
- Output 2 - 4-20mA type output and 24Vdc drive for external valves
Communications
- RS232 or optional RS485 multidrop
- In 485 mode, up to 4 valve packs per comms channel can be daisy chained (Care must be taken not to overload the ROV Power supplies in this mode current can reach 32A)
- Communication protocol 9600 N,8,1 or optionally faster if required
- Rx, Tx and communication link LED's
Software
- Laptop based control system
- Full SCADA and OPC network server package supplied
- Compensator volume display
- Water alarm
- Data logging to MS Access or Excel with full reporting system
- Integrate to existing systems via OPC interface compatible with Ethernet networks
Software (options)
- Hand controller available with latching or momentary switches
- Touch screen hardened laptop controller
- Network controllers or monitors
- Wireless link for deck testing
- 250Ah 24Vdc Battery pack for remote installations with acoustic modem (500m rated)
Mechanical
- Transparent inspection cover
- Hard anodised aluminium construction
- Dimensions: 340 x 165 x 120 mm
- Weight: 9.5kg in air, 5.3Kg in water
|
